What decides the cost of custom window coverings?
Short answer: the cost of custom window coverings comes down to how many windows you cover and their size. The product, the material or fabric, how each one lifts and how it mounts decide the rest. We do not list prices online. After a free measure at your home, you get a written quote for your own windows.
By Sun Blinds. Updated November 16, 2026.
Two homes with the same number of windows can end up with quite different quotes. This guide walks through why, so you know what to think about before your consultation.

The six window treatment cost factors
- Size and number of windows. Every covering is made to the measurements of its own window, so a wide or tall opening takes more material and sturdier hardware than a small one. The count matters as much as the size: a quote for a whole floor adds up window by window.
- Product type. Blinds, shutters, fabric shades and drapery are built from different parts in different ways. Two windows of the same size can be priced quite differently depending on what goes on them; the table below shows what moves the figure for each type.
- Material and fabric. Within one type, the material makes a real difference: wood, faux wood or aluminum slats for blinds, hardwood, faux wood or composite for shutters. For fabric shades and drapery it is the weave, the lining, and whether the fabric filters the light or darkens the room.
- Lift and control. A cordless lift, a top-down/bottom-up shade that lowers from the top for privacy with light above, or a motor run by remote or schedule each adds parts. Motorized coverings cost more than ones you raise by hand, and our guide to what decides the cost of motorized shades covers that choice in detail.
- Mounting and special shapes. Arched tops, angled windows, bays, corner windows and sliding doors take extra measuring and, often, custom-shaped coverings or special frames. Whether a covering sits inside the window frame or on the wall above it also changes the hardware and sometimes the size.
- Whole-house planning. When the whole house is planned at once, every room can share colors, materials and controls, and the work is measured together. Covering a few rooms first spreads the cost out; planning the full house first keeps the later rooms matching. If the house is new, our new-home window coverings page covers planning every window in one visit.
What moves the cost of each product
| Product | What shapes its cost |
|---|---|
| Blinds | The slat material (wood, faux wood or aluminum), the slat size and the width of each window. |
| Shutters | Solid panels built for each window and set in a frame: the material, the louver size, the number of panels and how the frame mounts. |
| Cellular shades | The honeycomb fabric, single or double cells, light-filtering or room-darkening fabric, and the lift. |
| Roller shades | The fabric, and the hardware at the top: an open roll, or a cover that hides it. |
| Solar shades | The screen fabric and its openness, which sets how much view, glare and sun come through. |
| Roman and fabric shades | The fabric, the fold style and the lining, since each shade is sewn to its window. |
| Drapery | The amount of fabric for the width and fullness, the pleat style, the lining, and the rod or track. |
| Layered shades | Two layers of alternating sheer and solid bands in one shade, and the fabric chosen for them. |
| Vertical blinds and panel-track shades | The width of the door or window, the vane or panel material, and the number of panels on the track. |
How we give you a price
- A free consultation at your home. A design consultant brings samples, so you see materials and fabrics in the light of your own rooms.
- We measure every window, including the shapes and depths that decide how each covering mounts.
- A written quote that names each product, its fabric or material and its control, window by window, after we confirm measurements, product choices and the installation.
- No obligation. The quote is yours to think over, compare and change before you decide.
Ways to keep the cost in line
- Start with the rooms that matter most, such as a bedroom that needs darkening or a living room with afternoon glare, and add the others later.
- Match products room by room. Use shutters or drapery where the look counts most, and simpler roller or cellular shades in bedrooms, offices and the laundry room.
- Motorize only the windows out of reach, such as high windows over a stair or a wide wall of glass, and keep hand-operated lifts elsewhere.
- Tell us what each room needs: darkening, privacy, less glare or more view. Knowing the goal lets the consultant suggest the simplest product that does the job.
- Plan the whole house, even if you buy in stages, so the second round matches the first.
Related guides
- What decides the cost of retractable awnings, exterior shades and screens, for the patio and the outside of the house.
- Battery or hardwired shades, for motorized shades in a remodel or a new build.
- Motorized window coverings, for shades that run on a schedule or from a remote.
- Commercial window treatments, for offices, restaurants and other business spaces.
Where we measure and install
We plan and install custom window coverings across the Sacramento region and the Bay Area. Our service areas page lists every town we cover.
Questions about window covering cost
Why don't you list prices online?
Every covering is made for its own window, so a price without measurements would only be a guess. We measure first and put the real figure in writing.
Is the consultation free?
Yes. The visit and the measuring are free, and there is no obligation to order.
How much do blinds cost?
It depends on the width and height of each window, the slat material and the lift. We quote blinds window by window once every opening is measured.
What affects shutter prices?
Mainly the material, the size and shape of each window, the number of panels and the style of frame. Arched or angled windows take custom-shaped panels.
Does motorizing add to the cost?
Yes. A motor, its power and its controls add to each shade. Many homeowners motorize only the windows that are hard to reach or opened most often, and keep the rest hand-operated.
Can I start with a few rooms and add more later?
Yes. Choosing colors and materials for the whole house at the first visit makes it easier for later rooms to match.
Book a free in-home consultation
Call (916) 538-9934 (Sacramento region) or (510) 556-4233 (Bay Area), or book your free consultation online.
Sources: our own consultations and installations since January 2025. Updated November 16, 2026.
Sun Blinds US, Inc. · California contractor license #1064155