Lutron Lumaris lighting
Short answer: Lumaris is Lutron's tunable-white light, in downlights and tape light, that also dims warm like an incandescent bulb. It runs from 1,800 to 4,000 kelvin and works with RadioRA 3 and HomeWorks, so it suits a remodel as well as a new home. Sun Blinds plans the fixtures with you, installs them and sets up the scenes.
What Lumaris light does
Many LED lights hold one color of white and can look flat when dimmed. Lutron makes every Lumaris light tunable, mixing at least two channels so the white can move between warm and crisp:
- Tunable white and warm dim in one: from a warm 1,800 kelvin glow to a clear 4,000 kelvin white, at nearly any brightness.
- Smooth dimming: Lutron gives flicker-free dimming down to 0.1 percent.
- Color rendering: a CRI rating of 90 or higher, so finishes and fabrics look true.
The Lumaris range
- Downlights in three- and four-inch openings: - a remodeler downlight with a canless housing for a finished ceiling; - a retrofit downlight that goes into existing cans.
- Tape light for coves, shelves and under cabinets: - tunable white; - RGB plus tunable white, when you want color as well.
The systems it runs on
Lumaris is listed for both of Lutron's whole-home systems. On RadioRA 3, Lumaris tape light is part of the system itself, next to its keypads and Lutron shades. On HomeWorks, the downlights and tape join the same scenes. Either way, one keypad press can set the light warm and low and close the shades for the evening.
Where Lumaris works well
Because the retrofit downlight uses the cans already in the ceiling, Lumaris suits a home that is lived in, with finished ceilings. Tape light adds a layer under kitchen cabinets, along a cove or inside shelving, and can carry the same warm-to-cool setting as the downlights in the room.
Lumaris questions, answered
What is Lumaris tape light?
Lutron's tunable-white tape light for coves, shelves and under cabinets, also made in an RGB plus tunable-white version, and part of RadioRA 3.
Can Lumaris downlights go into my existing cans?
Yes. Lutron makes a Lumaris retrofit downlight for existing cans, and a remodeler downlight with a canless housing for finished ceilings.
Which Lutron systems work with Lumaris?
Lutron lists Lumaris for RadioRA 3 and HomeWorks.
What color range does Lumaris cover?
Tunable white from 1,800 to 4,000 kelvin, with warm dimming. For full color across the room, see Ketra on our light fixtures page.
Plan Lumaris for your home
Call (916) 538-9934 for the Sacramento region or (510) 556-4233 for the Bay Area, or send us your address. Our Lutron lighting systems page explains the systems behind it.
Facts checked November 2026.
Sources: Lutron Electronics, Lumaris page and residential lighting page (lutron.com, read November 2026).
Sun Blinds US, Inc. · California contractor license #1064155